HCR L110-E5 ROCK DRILL – TWO DRIFTER OPTIONS FOR INCREASED VERSATILITY

By automatically controlling the impact force, feed force, rotation force and dual damper pressure, the HCR L110 continuously adapts to the changing rock conditions, increasing drilling performance and the life of drill tools while decreasing fuel consumption.

Low-emission C9 3B engine offers low fuel consumption and meets US exhaust emissions regulations. Whether you choose the HD828 drifter or step-up to the HD836, you will benefit from dependable performance and easy operation.

With FRD’s TFSS (total fuel savings system), the operator selects the optimum engine speed for the application, allowing all fuel savings functions to be automatically managed during drilling operation.

The HCR L110-E5, from Furukawa FRD with an extendable boom, incorporates a self-adjusting rock drilling system to automatically control the impact, feed, & rotation force to improve performance & extend the life of your drill.

HCR L110-E5 Features & Benefits

  • Advanced rotary rod changer allows easy drill rod changes. Operators can add and remove rods using a single lever.
  • HCR L110-E5 features 12′ or 14′ rods with extendable boom for increased drill pattern.
  • Heavy-duty undercarriage – featuring a pentagonal section design to reduce dirt build-up and track wear – ensures strength and durability.
  • High-output compressor increases flushing air, provides faster drilling and decreases bit wear.
  • Reliable dust control system with increased suction capacity provides effective pre-cleaning to reduce the escape of rock dust. An optional dust suppression system is available for difficult drilling conditions.
  • Choose from an HD828 or HD836 drifter to meet your specific application needs.
  • Advanced rotary rod changer allows easy drill rod changes. Operators can add and remove rods using a single lever.
  • HCR L110-E5 features 12′ or 14′ rods with extendable boom for increased drill pattern.
  • Heavy-duty undercarriage – featuring a pentagonal section design to reduce dirt build-up and track wear – ensures strength and durability.
  • High-output compressor increases flushing air, provides faster drilling and decreases bit wear.
  • Reliable dust control system with increased suction capacity provides effective pre-cleaning to reduce the escape of rock dust. An optional dust suppression system is available for difficult drilling conditions.
  • Choose from an HD828 or HD836 drifter to meet your specific application needs.

Specifications

Title Unit
Overall weight in lbs. (kg) 45,415 lbs (20,600 kgs)
Overall length in inches (mm) 32′10″ (10,015 mm)
Shipping length in inches (mm) 36′7″ (11,160 mm)
Overall width in inches (mm) 11′5″ (3,490 mm)
Shipping width in inches (mm) 8′1″ (2,465 mm)
Overall height in inches (mm) 15′2″ (4,620 mm)
Shipping height in inches (mm) 11′7″ (3,520 mm)
Title Unit
Model HD828
Weight in lbs. (kg) 597 lbs (271 kg)
Length in inches (mm) 3′9″ (1,148 mm)
Width in inches (mm) 1′3″ (387 mm)
Height in inches (mm) 1′1″ (328 mm)
Number of blows BPM 2,700 – 3,300 BPM
Rotating speed 0 – 190 rpm (0-190 min-1)
Title Unit
Track length in inches (mm) 12′1″ (3,690 mm)
Track length on ground in inches (mm) 9′5″ (2,880 mm)
Track width in inches (mm) 1′1″ (330 mm)
Ground contact pressure 14.8 psi (101.8 kPa)
Ground clearance in inches (mm) 1′10” (560 mm)
Frame oscillation angle ±7.5°
Tramming speed 0 – 2.0 mph (0 – 3.3 km/h)
Gradeability 57.4% (30°)
Maximum traction force 28,551 lb-force (127 kN)
Title Unit
Make & model CAT® / C9.3B (Tier4Final, Stage V)
Type Diesel, Water-Cooled, 6 Cylinders
Piston displacement 567.5 cu in (9.3 L)
Power output 375 hp/2,200 rpm (280 kW/2,200 min-1)
Fuel capacity 158.5 gal (600 L)
DEF capacity 11.8 gal (44.7 L)
Title Unit
Variable displacement pump PV Pump x2
Fixed displacement pump Gear Pump X3
Hydraulic oil reservoir capacity 63.4 gal (240 L)
Title Unit
Model JE326-134
Type Extension Boom
Boom lifting angle: up/down 41° / 20°
Boom swing Aangle: right/left 32° / 0°
Boom slide length in inches (mm) 2′11” (900 mm)
Title Unit
Model GH832-33
Length in inches (mm) 28′7″ (8,700 mm)
Feed length (for 14′) in inches (mm) 17′2″ (5,225 mm)
Feed length (for 12′) in inches (mm) 15′1″ (4,595 mm)
Feed type Hydraulic Motor Driven Chain
Guide slide length in inches (mm) 4′11” (1,500 mm)
Guide swing angle: right/left 25° / 90°
Guide tilt angle 170°
Maximum pulling force 7,644 lb-force (34 kN)
Title Unit
Make & model AIRMAN / PDSF290-S16
Type 1-Stage Screw Compressor
Discharge airflow CFM 477 CFM (13.5 m3/min)
Discharge pressure 149 psi (1.03 MPa)
Title Unit
Model A885-44
Suction capacity CFM 1,413 CFM (40 m³/min)
Number of filter elements 6
Dust removal system Automatic Pulse Air Jet
Suction cap Slide Type
Title Unit
Model GR803-31
Number of rod storage 7 (For T51) pcs
Rod diameter in inches (mm) 2″ (51 mm)
Number of control levers 1 pcs
Title Unit
Bit range in inches (mm) 4.0″ - 5.0″ (102 - 127 mm)
Rod type T51
Rod length in inches (mm) 12′/14′ (3,660 mm/4,270 mm)
Starter rod length in inches (mm) 14′ (4,270 mm)
Title Unit
Battery 12V; 160Ah/5h x2
Light 24V; 70W x4
Voltage DC 24V
Title Unit
Working temperature 5° to 113° F / −15° to +45° C
Maximum altitude 8,202′ (2,500 m)

Options

  • Water / Dust Suppression System – 35 gal

  • Water / Dust Suppression System – 70 gal

  • 2D Angle Indicator

  • 3D Angle Indicator

  • All-In-One 3D Angle Indicator

  • Rear & Side View Camera With An Optional Separate Monitor

  • Rear Bumper

  • Cold Weather Kit (Esper, Webasto)

  • Heating Pad

  • Hand Rail

  • Central Greaser

Dependable Blasthole Drills Start at Step One

Blasthole rigs and drills don’t need much explanation. They’re used for drilling a hole into the surface of the rock, packing the hole with explosives and then detonating those explosives in the blasthole to break up rock and hard minerals to make it easier to remove.

Guide for the HCR L110-E5 Tier IV Top Hammer Drills | Rock Drills | Furukawa FRD

If you are interested in learning more, download our guide on choosing the right rock drill for your job.