HCRL90-E5

The HCRL90-E5 is the perfect drill for quarries or construction sites.

Simple, durable and efficient, the HCRL90-E5 with extendable boom incorporates a self-adjusting drill system that ensures high productivity no matter what the drilling situation. By automatically controlling the impact force, feed force, rotation force and dual damper pressure, the HCRL90-E5 continuously adapts to the changing rock conditions, increasing drilling performance and the life of drill tools while decreasing fuel consumption.

Optional Equipment

  • Water/Dust Suppression System
  • Heavy-Duty Rear-Mounted Bumper
  • 2D Angle Indicator
  • 3D Angle Indicator
  • All-In-One 3D Angle Indicator
  • Side/Rear Camera
  • Rear & Side View Camera with Separate Monitor
  • Rear Bumper
  • Cold Start Kit (ESPAR, WEBASTO)
  • Heating Pad
  • Hand Rail
  • Central Greaser

HCRL90-E5 Equipped EPA Tier 4 Final / EU Stage V

Specifications

DIMENSIONS AND WEIGHTUS StandardMetric
Overall Weight (A) *152,029 lbs23,600 kg
Overall Weight (B) *254,675 lbs24,800 kg
Overall Length34'11"10,630 mm
Shipping Length36'6"11,125 mm
Overall Width14'7"4,455 mm
Shipping Width8'10"2,700 mm
Overall Height14'11"4,540 mm
Shipping Height11'6"3,500 mm
DRILL MOTOR
ModelDOWMAX/ME350
Reduction Ratio1 : 3.071
Maximum Torque3,098 lb-force-ft4.2 KN-m
Rotation Speed0 - 120 rpm0 - 120 min-1
Bit Range3.5 ~ 6.5 in89 ~ 165 mm
UNDERCARRIAGE
Track Length12'5"3,785 mm
Track Length on Ground9'9"2,980 mm
Track Width1'1"330 mm
Ground Contact Pressure *517.1 psi118 kPa
Ground Clearance1'7"475 mm
Frame Oscillation Angle±7.5°
Tramming Speed0 - 2.2 mph0 - 3.5 km/h
Gradeability46.6% (25°)
Maximum Traction Force35,969 lb-force160 kN
ENGINE
Make & ModelCAT® C13 (Tier4 Final, Stage V)
TypeDiesel, Water-Cooled, 6 Cylinders
Piston Displacement3.3 gal12.5 L
Power Output456 hp / 2,000 rpm340 kW / 2,000 min-1
Fuel Capacity192.8 gal730 L
DEF Capacity18.5 gal70 L
HYDRAULIC EQUIPMENT
Variable Displacement PumpPV Pump x2
Fixed Displacement PumpGear Pump x3
Drive MotorHydraulic Motor with Reduction Gear
Hydraulic Oil Reservoir Capacity74 gal280 L
BOOM
ModelJF325
TypeFixed
Boom Lifting Angle (Up / Down)50.5° / 13.9°
Boom Swing Angle (Right / Left)30° / 8°
GUIDE SHELL
ModelGH834
Overall Length32'6"9,910 mm
Feed Length18'8"5,694 mm
Feed TypeHydraulic Motor Driven Chain
Guide Slide Length4'11"1,500 mm
Guide Swing Angle (Right / Left)16° / 90°
Guide Tilt Angle120°
Maximum Pulling Force6,744 lb-force30 kN
COMPRESSOR
Make & ModelAIRMAN PDSK900-S20
Type2-Stage Screw Compressor
Discharge Airflow 1953 cfm27.0 m3/min
Discharge Airflow 2858 cfm24.3 m3/min
Discharge Pressure 1 (When
2,000 rpm/min-1)
334 psi2.3 MPa
Discharge Pressure 2 (When
1,800 rpm/min-1)
363 psi2.5 MPa
DUST COLLECTOR
ModelA885
Suction Capacity2,649 cfm75 m³/min
Number of Filter Elements12
Dust Removal SystemAutomatic Air Pulse Jet
Suction CapSlide Type
ROD CHANGER
ModelGR803
Number of Rods8
Rod Length16'5"5,000 mm
Rod Diameter3", 3.5", 4"76 mm, 89 mm,
102 mm
Number of Control Levers1
ELECTRICS
Battery12V x 2; 176Ah/5hr
Light24V; 70W x4
VoltageDC 24V
OPERATING ENVIRONMENT
Working Temperature5° ~ 113° F-15° ~ 45° C
Maximum Altitude6,562'2,000 m
Note:
*1 “Overall Weight (A)” includes weights of fuel and oils (full).
*2 “Overall Weight (B)” includes weight of “Overall Weight (A)”, operator, rod and bit.
*3 “Ground Contact Pressure” is calculated based on “Overall Weight (A)”. 
Cummins is a registered trademark of Cummins, Inc.
AIRMAN is a registered trademark of HOKUETSU INDUSTRIES CO., LTD. 
Furukawa’s policy is one of continual improvement. Specifications may change.