HCR1800-EDII
The HCR1800-EDII allows you to choose from two different drifters, depending on your specific application needs.
Low-emission Tier IV CAT® engine offer low fuel consumption and meets US exhaust emissions regulations.
Whether you choose the HD828 drifter or step-up to the HD836, you will benefit from dependable performance and easy operation.
With FRD’s TFSS (total fuel savings system), the operator selects the optimum engine speed for the application, allowing all fuel savings functions to be automatically managed during drilling operation.
Optional Equipment
- Water/Dust Suppression System
- Heavy-Duty Rear-Mounted Bumper
- Cold Start Kit (ESPAR, WEBASTO)
- 2D Angle Indicator
- 3D Angle Indicator
- Rear View Camera
HCR1800-ED Equipped with Tier IV EPA Compliant Engine
Specifications
| HCR1800-ED Series II | ED-828 | ED-836 | ||
|---|---|---|---|---|
| PERFORMANCES | US Standard | Metric | US Standard | Metric |
| Operating Weight with Fuel/Oil | 46,960 lbs. | 21,300 kg | 46,960 lbs. | 21,300 kg |
| Travel Speed | 0 - 2.1 mph | 0 - 3.5 km/h | 0 - 2.1 mph | 0 - 3.5 km/h |
| Maximum Traction Force | 28,550 lb-force | 127 kN | 28,550 lb-force | 127 kN |
| Maximum Grade of Hill Climb | 57.4% (30°) | |||
| Oscillating Angle | ±7.5° | |||
| Ground Contact Pressure | 15.3 psi | 105.4 kPa | 15.3 psi | 105.4 kPa |
| DRIFTER | ||||
| Model | HD828 | HD836 | ||
| Mass | 728 Ibs. | 330 kg | 904 Ibs. | 410 kg |
| Overall Length | 5'3" | 1,590 mm | 5'5" | 1,650 mm |
| Overall Width | 1'3" | 390 mm | 1'4" | 418 mm |
| Overall Height | 1'1" | 327 mm | 1'3" | 371 mm |
| Number of Blows | 2,700 - 3,300 bpm | 2,600 - 3,100 bpm | ||
| Number of Revolutions | 0 - 190 rpm | 0-190-1 | 0 - 150 rpm | 0-150 min-1 |
| ENGINE | ||||
| Make & Model | CAT® C9.3 (Tier4 Final, Stage IV) | |||
| Type | Diesel, Water Cooled, 6 Cylinders | |||
| Rated Output | 350 hp/2,200 rpm | 261 kw/2,200 min-1 | 350 hp/2,200 rpm | 261 kw/2,200 min-1 |
| HYDRAULIC EQUIPMENT | ||||
| Variable Displacement Pump | Axial Piston Pump x 2 | |||
| Fixed Displacement Pump | Gear Pump x 3 | |||
| Drive Motor | Hydraulic Motor with Reduction Gear | |||
| BOOM | ||||
| Model | JE326-14 | |||
| Type | Extension Boom | |||
| Boom Lifting Angle: Up/Down | 40°/20° | |||
| Boom Swing Angle: Right/Left | 30°/0° | |||
| Boom Slide Length | 2'11" | 900 mm | 1'11" | 600 mm |
| GUIDE SHELL | ||||
| Model | GH832-4 | |||
| Overall Length | 28'6" | 8,700 mm | 28'6" | 8,700 mm |
| Feed Length | 17'2" | 5,225 mm | 17'2" | 5,225 mm |
| Guide Slide Length | 4'11" | 1,500 mm | 4'11" | 1,500 mm |
| Guide Swing Angle: Right/Left | 25˚/90˚ | |||
| Guide Tilt Angle | 170° | |||
| Maximum Pulling Force | 7,640 lb-force | 34 kN | 7,640 lb-force | 34 kN |
| Feed System | Chain Driven by Hydraulic Motor | |||
| COMPRESSOR | ||||
| Make & Model | Airman PDSF290-S16 | |||
| Type | Screw 1-Stage | |||
| Discharge Airflow | 477 cfm | 13.5 m3/min | 477 cfm | 13.5 m3/min |
| Discharge Pressure | 149 psi | 1.03 MPa | 149 psi | 1.03 MPa |
| DUST COLLECTOR | ||||
| Model | A885-44 | |||
| Airflow | 1,413 CFM | 40 m3/min | 1,413 CFM | 40 m3/min |
| Number of Elements | 6 | |||
| Dust Removal System | Automatic Air Pulse Jet | |||
| Suction Cap | Slide Type | |||
| ROD CHANGER | ||||
| Model | GR803-1 | |||
| Number of Rods | 7 or 6 (GT60 - 87 mm/4.5" Tube) | |||
| Rod Length | 12' ( 14' for ST58 and GT60 ) | |||
| ELECTRICAL EQUIPMENT | ||||
| Battery | 12V; 160Ah/5h x 2 | |||
| Voltage | DC24V | |||
| FUEL/OIL CAPACITY | ||||
| Diesel Fuel | 158 gal / 600 Litter | |||
| Hydraulic Oil | 63 gal / 240 Litter | |||
| DEF | 9 gal / 34 Litter | |||
| BIT AND ROD | ||||
| Bit Diameter | 3.5" - 5" | 89~127 mm | 4" - 5.5" (6") | 102~140 mm (152 mm) |
| Rod Size | T51, ST58 | ST58, T60, GT60 GT60 Tube (Dia. 87 mm/3.5") |
||
| Rod Length | 12' (or 14' for ST58 ) | 14' | ||
| First Rod Length Maximum | 14' | 18' | ||
| CIRCUMSTANCE | ||||
| Ambient Temperature Range | 5° – 113° F | -15° – +45° C | 5° – 113° F | -15° – +45° C |
| Maximum Altitude | Max. 8,202 ft | Max. 2,500 m | Max. 8,202 ft | Max. 2,500 m |
