DCRL130
The DCRL130 has established itself as a reliable, productive resource for drilling operations around the world.
These drills have been proven in soft, medium and hard rock conditions with multiple end-users and applications providing deep holes from 3.5″ to 6.5″ at fast drilling rates with low maintenance requirements.
Servicing the DCRL130 is easy with access to all key components such as the engine, fluid levels and compressor through large panel doors located at ground level for maintenance when needed.
The cabs have been redesigned to provide operators maximum comfort with single-lever drilling controls, digital gauges, and superior views of drilling operation.
Optional Equipment
- Water/Dust Suppression System – 70 gal
- 2D Angle Indicator
- 3D Angle Indicator
- Side/Rear Camera
- Rear Bumper
- Cold Start Kit (ESPAR, WEBASTO)
- Heating Pad
- Hand Rail
- Central Greaser
DCRL130 Equipped with Stage V/Tier IV Final Engine
Specifications
| DIMENSIONS AND WEIGHT | US Standard | Metric |
| Overall Weight (A) *1 | 52,029 lbs | 23,600 kg |
| Overall Weight (B) *2 | 54,675 lbs | 24,800 kg |
| Overall Length | 34'11" | 10,630 mm |
| Shipping Length | 36'6" | 11,125 mm |
| Overall Width | 14'7" | 4,455 mm |
| Shipping Width | 8'10" | 2,700 mm |
| Overall Height | 14'11" | 4,540 mm |
| Shipping Height | 11'6" | 3,500 mm |
| DRILL MOTOR | ||
| Model | DOWMAX/ME350 | |
| Reduction Ratio | 1 : 3.071 | |
| Maximum Torque | 3,098 lb-force-ft | 4.2 KN-m |
| Rotation Speed | 0 - 120 rpm | 0 - 120 min-1 |
| Bit Range | 3.5 ~ 6.5 in | 89 ~ 165 mm |
| UNDERCARRIAGE | ||
| Track Length | 12'5" | 3,785 mm |
| Track Length on Ground | 9'9" | 2,980 mm |
| Track Width | 1'1" | 330 mm |
| Ground Contact Pressure *5 | 17.1 psi | 118 kPa |
| Ground Clearance | 1'7" | 475 mm |
| Frame Oscillation Angle | ±7.5° | |
| Tramming Speed | 0 - 2.2 mph | 0 - 3.5 km/h |
| Gradeability | 46.6% (25°) | |
| Maximum Traction Force | 35,969 lb-force | 160 kN |
| ENGINE | ||
| Make & Model | CAT® C13 (Tier4 Final, Stage V) | |
| Type | Diesel, Water-Cooled, 6 Cylinders | |
| Piston Displacement | 3.3 gal | 12.5 L |
| Power Output | 456 hp / 2,000 rpm | 340 kW / 2,000 min-1 |
| Fuel Capacity | 192.8 gal | 730 L |
| DEF Capacity | 18.5 gal | 70 L |
| HYDRAULIC EQUIPMENT | ||
| Variable Displacement Pump | PV Pump x2 | |
| Fixed Displacement Pump | Gear Pump x3 | |
| Drive Motor | Hydraulic Motor with Reduction Gear | |
| Hydraulic Oil Reservoir Capacity | 74 gal | 280 L |
| BOOM | ||
| Model | JF325 | |
| Type | Fixed | |
| Boom Lifting Angle (Up / Down) | 50.5° / 13.9° | |
| Boom Swing Angle (Right / Left) | 30° / 8° | |
| GUIDE SHELL | ||
| Model | GH834 | |
| Overall Length | 32'6" | 9,910 mm |
| Feed Length | 18'8" | 5,694 mm |
| Feed Type | Hydraulic Motor Driven Chain | |
| Guide Slide Length | 4'11" | 1,500 mm |
| Guide Swing Angle (Right / Left) | 16° / 90° | |
| Guide Tilt Angle | 120° | |
| Maximum Pulling Force | 6,744 lb-force | 30 kN |
| COMPRESSOR | ||
| Make & Model | AIRMAN PDSK900-S20 | |
| Type | 2-Stage Screw Compressor | |
| Discharge Airflow 1 | 953 cfm | 27.0 m3/min |
| Discharge Airflow 2 | 858 cfm | 24.3 m3/min |
| Discharge Pressure 1 (When 2,000 rpm/min-1) | 334 psi | 2.3 MPa |
| Discharge Pressure 2 (When 1,800 rpm/min-1) | 363 psi | 2.5 MPa |
| DUST COLLECTOR | ||
| Model | A885 | |
| Suction Capacity | 2,649 cfm | 75 m³/min |
| Number of Filter Elements | 12 | |
| Dust Removal System | Automatic Air Pulse Jet | |
| Suction Cap | Slide Type | |
| ROD CHANGER | ||
| Model | GR803 | |
| Number of Rods | 8 | |
| Rod Length | 16'5" | 5,000 mm |
| Rod Diameter | 3", 3.5", 4" | 76 mm, 89 mm, 102 mm |
| Number of Control Levers | 1 | |
| ELECTRICS | ||
| Battery | 12V x 2; 176Ah/5hr | |
| Light | 24V; 70W x4 | |
| Voltage | DC 24V | |
| OPERATING ENVIRONMENT | ||
| Working Temperature | 5° ~ 113° F | -15° ~ 45° C |
| Maximum Altitude | 6,562' | 2,000 m |
