HCR1100-ER ROCK DRILL – BETTER PENETRATION WITH INCREASED IMPACT

The HCR1100-ER drill incorporates innovative features for higher output and is capable of drilling at larger diameters.

Utilizing a Cummins® Tier-IV EPA compliant engine, the HCR1100-ER combines higher performance with fuel efficiency.

The Furukawa HD822 drifter (patent applied for) is designed to minimize drill noise and vibration, while increasing performance. With 26.7% more impact and 13% more airflow than its predecessor, this drill has the ability to perform in harder rock at a larger diameter.

The HCR1100-ER, top hammer drill from Furukawa FRD, incorporates innovative features for better penetration, increased impact at a higher output & is capable of drilling at larger diameters.

HCR1100-ER Features & Benefits

  • The improved electro-hydraulic controls allow easier operation.
  • With FRD’s TFSS (total fuel savings system), the operator selects the optimum engine speed for the application, allowing all fuel savings functions to be automatically managed during drilling operation.
  • The monitoring system incorporates gauges next to the drilling station, allowing the operator a quick visual of engine temperature, hydraulic oil temperature and fluid levels.
  • Automatic rod changer eliminates the need for operators to manually install drill steel, resulting in increased production and enhanced operator safety.
  • Upgraded compressor increases free air delivery by nearly 28% to accommodate larger diameter drilling.
  • Winch-ready frame adds application versatility.
  • Optional wireless remote allows tramming and drilling from a secondary location.
  • The improved electro-hydraulic controls allow easier operation.
  • With FRD’s TFSS (total fuel savings system), the operator selects the optimum engine speed for the application, allowing all fuel savings functions to be automatically managed during drilling operation.
  • The monitoring system incorporates gauges next to the drilling station, allowing the operator a quick visual of engine temperature, hydraulic oil temperature and fluid levels.
  • Automatic rod changer eliminates the need for operators to manually install drill steel, resulting in increased production and enhanced operator safety.
  • Upgraded compressor increases free air delivery by nearly 28% to accommodate larger diameter drilling.
  • Winch-ready frame adds application versatility.
  • Optional wireless remote allows tramming and drilling from a secondary location.

Specifications

Title Unit
Operating weight with fuel & oil in lbs. (kg) 27,500 lbs (12,460 kgs)
Travel speed 0 - 2 mph (0 - 3.2 km/h)
Maximum traction force 19,700 lb-force (88 kN)
Maximum grade of hill climb 57.7% (30°)
Oscillating angle ±7.6°
Ground clearance in inches (mm) 23″ (585 mm)
Ground contact pressure *3 11.2 psi (77.3 kPa)
Title Unit
Model HD 822
Operating weight in lbs. (kg) 533 lbs (242 kgs)
Power 29.5 hp (22 kW)
Overall length in inches (mm) 44.5″ (1,130 mm)
Overall width in inches (mm) 14.7″ (373 mm)
Overall depth in inches (mm) 12.9″ (328 mm)
Number of blows BPM 2,700 - 3,300 BPM
Number of revolutions 190 rpm (190 min-1)
Title Unit
Make & model Cummins® QSB6.7
Type Water Cooled, 6-Cylinder Diesel Engine
Rated output 226 hp/2,200 rpm / 168 kW/2,200 min-1
Emission control Tier-IV Final
Fuel capacity 84 gal (320 L)
DEF capacity 5 gal (19 L)
Title Unit
Variable displacement pump Axial Piston Pump X2
Fixed displacement pump Gear Pump X3
Drive motor Hydraulic Motor with Reduction Gear
Title Unit
Model JE326
Type Extension Boom
Boom lifting angle: up/down 45°/15°
Boom swing angle: right/left 30°/30°
Boom slide length in inches (mm) 3′11″ (1,200 mm)
Title Unit
Model GH831
Overall length in inches (mm) 26′0″ (7,925 mm)
Feed length in inches (mm) 15′8″ (4,781 mm)
Guide slide length in inches (mm) 3′11″ (1,200 mm)
Guide swing angle: right/left 30°/90°
Guide tilt angle 180°
Maximum pulling force 7,060 lb-force (31.4 kN)
Feed system Motor Chain
Title Unit
Make & model AIRMAN PDS265-S37C
Type Screw 1-Stage
Discharge airflow 275 CFM (7.8 m3/min)
Discharge pressure 149 psi (1.03 Mpa)
Title Unit
Model A844
Airflow 918 CFM (26 m3/min)
Number of elements 5
Dust removal system Automatic Pulse Air Jet
Suction cap Slide Type
Title Unit
Number of rods 5
Rod length T38 – T45 in inches (mm) 10′/12′ (3.05 mm/3.66 mm)
Title Unit
Battery 12V; 108Ah/5hr
Voltage DC 24V
Title Unit
Fuel tank 84 gal (320 L)
Hydraulic tank 45 gal (170 L)
DEF tank *4 5 gal (19 L)
Title Unit
Bit diameter in inches (mm) 2.5″ - 4″ (64 mm - 102 mm)
Rod size T38 - T45
Rod length in inches (mm) 10′ or 12′ (3,050 mm or 3,660 mm)
First rod length maximum in inches (mm) 13′ (4,000 mm)
Title Unit
Operating temperature 5° to 113° F / −15° to +45° C

Options

  • Water / Dust Suppression System – 35 gal

  • Water / Dust Suppression System – 70 gal

  • Remote Control

  • 2D Angle Indicator

  • Rear Bumper

  • Cold Weather Kit (Esper, Webasto)

  • Heating Pad

Dependable Blasthole Drills Start at Step One

Blasthole rigs and drills don’t need much explanation. They’re used for drilling a hole into the surface of the rock, packing the hole with explosives and then detonating those explosives in the blasthole to break up rock and hard minerals to make it easier to remove.

Guide for the HCR1100-ER Tier IV Top Hammer Drills | Rock Drills | Furukawa FRD

If you are interested in learning more, download our guide on choosing the right rock drill for your job.